Nickel 200 Seamless Tubes, ASTM B161 Alloy 200 Seamless Tubing, GOST НП-2 Tube, Nickel 200 High Pressure Tube, Nickel Alloy 200 Tubes, Nickel 200 Cold Rolled Coiled Tube,Nickel 200 Polish Tube, 200 Nickel Welded Tubes Suppliers and Exporters in Mumbai, India.
Dealer of ASTM B622 Nickel 200 Tube, 200 Nickel BRIGHT ANNEALED Tube, Alloy 200 ERW Tubes Supplier, Nickel UNS N02200 Tubing, Nickel NW 2200 Tubes, Nickel 200 Decorative Tube, Nickel 200 Electropolish Tube, Nickel 200 Tubing, Nickel WERKSTOFF NR. 2.4066 Tubing Manufacturer in India.
Kinsey Piping is one of the pioneer dealer and trader of quality Nickel Alloy 200 Tubes, which is commercially pure (99.6 %) wrought nickel. Nickel 200 Seamless Tubes (UNS N02200) is normally limited to service at temperatures below 600 Degree F. At higher temperatures, Nickel 200 Welded Tubes can suffer from graphitization which can result in severely compromised properties. All hot working and cold working practices can be utilized when shaping Nickel 200 ERW Tubes. Hot working temperatures of Nickel 200 ERW Tubes should be between 1200 Degree F and 2250 Degree F with heavy forming to be performed at temperatures above 1600 Degree F. Annealing in Nickel 200 Round Tubes should be performed at a temperature between 1300 Degree F and 1600 Degree F. Care should be taken when choosing the anneal temperature and time at temperature in Nickel 200 Square Tubes for this can greatly influence the mechanical properties and structure of the material. When operating temperatures are expected to exceed 600 Degree F, carbon content in Nickel 200 Rectangular Tubes becomes critical. The lower carbon content of Nickel 200 Electropolish Tubes makes the material resistant to graphitization and therefore less subject to embrittlement. Nickel 200 Instrumentation Tubes are approved for construction of pressure vessels and components under ASME Boiler and Pressure Vessel Code Section VIII, Division 1. Nickel 200 High Pressure Tubes has good mechanical properties and excellent resistance to many corrosive environments.
Alloy 200 Tubing, Nickel Tube, Nickel 200 Santiary Tube, ASTM B622 Nickel 200 Welded Tubing, 200 Nickel Alloy Seamless Tubing, 200 Nickel Heat Exchanger Tube, Nickel 200 Welded Tubes Stockist, Stockholder of ASTM B161 Nickel 200 Tube, Nickel 200 Instrumentation tube, 200 Nickel Tubing Manufacturer in India.
Nickel Alloy 200 Tubes Specifications
|
||
Specifications | : | ASTM B161, B622 / ASME SB163, B730 |
Dimensions | : | ASTM, ASME and API |
Alloy 200 Tubes Size |
: | 6 mm OD x 0.7 mm to 50.8 mm OD x 3 mm thk. |
Schedule | : | SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Type | : | Seamless / ERW / Welded / Fabricated / LSAW Tubes |
Form | : | Round, Square, Rectangular, Hydraulic Etc |
Length | : | Single Random, Double Random & Cut Length. |
End | : | Plain End, Beveled End, Treaded |
200 Nickel Alloy Tube Chemical Composition
C | Mn | Si | S | Cu | Fe | Ni |
0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 200 Tubing Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Elongation |
Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | 45 % |
Equivalent Grades for 200 Nickel Seamless and Welded Tubes
UNS | JIS | BS | GOST | AFNOR | EN |
N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |